Europa XS Parts and accessories

Europa Aircraft strongly recommends you purchase all modifications and parts direct from Europa Aircraft.

This web page only shows a small selection of stocked items, we also stock different size nuts, bolts, washers and other fittings. If you have any additional requirements, please do not hesitate to contact us for a quote. 
  • Approved Optional Modifications
  • Composite Materials and Ancillaries
  • Pre Manufactured Parts
  • Wheels and Brakes
  • Propellers
  • Electrics
  • placards
  • Instrumentation
  • Spares and Accessories
  • Tools
  • Upholstery 

​Approved Optional Modifications

Note
# Indicates a mod already included in new kits
Mod 33
Installation of water drain valves - drains both sides of fuel tank, includes all necessary hoses and connections.
#Mod 42
​Installation of cold air inlet plenum chamber. Kit includes NACA duct splash moulding, plenum chamber, air filter, and connecting hardware. For Classic engine installation
#Mod 43




​
​​#Mod 43/2
Conversion of tailwheel from the original Classic Europa style to the current monowheel tailwheel. This modification greatly improves ground handling. (Includes epoxy resin)
​
As Mod 43 but excludes epoxy resin.​
#Mod 47
Extended baggage bay modification. This modification enables Classic Europa fuselages to be converted to incorporate the XS style baggage bay.
#Mod 49
This modification adds a second fuel filter so that if the main tank filter becomes blocked, switching to the reserve tank will also switch to a separate filter.
#Mod 50
T​his modification enables Europas with Classic foam wings to be fitted with the XS style underwing pitot/static system. This system gives more accurate airspeed information than the original system with fuselage mounted static ports.
Mod 51
This modification prevents wear in the fasteners connecting the landing gear retraction lever to the landing gear mechanism.
#Mod 52
This modification enables Classic Europas to have the maximum gross weight increased from 1300 lb. to 1370 lb. (Includes Mod 74)
Mod 53
Long Range fuel tank (for the monowheel only). This modification increases the effective size of the fuel tank by the addition of a subsidiary tank which feeds into the main tank. It provides an extra 35 litres of fuel. Total weight with full fuel 30kg (66 lb).
#Mod 54
Cranked control column. The kit includes sleeves to adapt the 1 ¼” bore control column bottom fitting to the 1” diameter cranked columns
Mod 55
​Monowheel speed kit. This kit provides a possible 9kt increase in speed. It includes flap hinge, outrigger mechanism and wheel, and tailwheel fairings. Total weight is approx. 1.3kg (3lb).
​Mod 56
Tri-gear speed kit. Tri-gear aircraft should see a 10kt speed increase with all fairings added. The kit includes wheel, flap hinge, and leg fairings. Total weight approx 4.1kg (9lb).
#Mod 59
Nose gear shimmy damper. This modification prevents grease from getting on to the friction disc, and improves the anti-shimmy adjustment.
Mod 60
Fuel contents gauge. This modification introduces a float type fuel gauge, calibrated to the Europa fuel tank. It indicates 8 equal increments of the ‘main’ tank. Incorporation of this modification can be carried out at any stage, but is easier if completed before fitting the tank to the cockpit module. The kit includes sender, gauge, pre-assembled wiring harness, and all fasteners.
Mod 61 (A)
​Stall warner. This modification can be fitted to new build kits, or can be retrofitted. The kit contains a light alloy sensor probe, pneumatic lines, quick release connectors, vacuum switch, an 88db piezo electric horn, and pre-assembled wiring harness. Sounding of the horn is triggered by reduced pressure at the wing leading edge at high angles of attack. (new build, wings not yet closed
#Mod 62
Replacement of tailplane torque tube drive pins. This modification introduces 3/8” diameter pins in place of the existing ¼” pins; the bearing stress is reduced by 1/3rd, which will tolerate ground loads better than before.
Mod 63
Instrument panel fascias. Designed to enable quick and easy access to the back of the instrument panels, a combination of panel fascias can be chosen to suit monowheel or tri-gear aircraft, with either VDO or Flydat instrumentation. The right hand panel may be divided into two separate areas, the upper for avionics, and the lower for pitch trim, propeller and flap controls, avionics master switch and square type circuit breakers. Fasteners are available at extra cost. Flight instrument cut-outs are based on typical instruments, but variations may exist. Instruments can be supplied on request
Monowheel instrument panel, Aluminium Cut-out
IM01M
Tri-gear instrument panel, Aluminium Cut-out
IM01T
Blank panel, Aluminium Cut-out
​IM01T-NH
Blank full depth avionics panel, Aluminium Cut-out
IM02B
Engine instrument panel (mono/Flydat), Aluminium Cut-out
IM03MF
​Engine instrument panel (mono/VDO), Aluminium Cut-out
IM03MV
Engine instrument panel (Tri-gear/Flydat), Aluminium Cut-out
IM03TF
Engine instrument panel (Tri-gear/VDO), Aluminium Cut-out
IM03TV
Blank short avionics panel, Aluminium Cut-out​
IM04
​Blank short avionics panel (including 52mm hole), Aluminium Cut-out
IM04H
Control panel - monowheel, Aluminium Cut-out
IM05M
Control panel - tri-gear, Aluminium Cut-out
IM05T
Blanking plate for propeller control holes, Aluminium Cut-out
IM05B
Mod 64
Hi-top fuselage. This Mod increases the available headroom by 50mm (2”). It is incorporated when the top and bottom fuselage sections are joined
#Mod 65
Finger brake system. This Mod introduces hand or 'finger' operated main wheel brakes to the trigear aircraft in place of footbrakes currently in use.
#Mod 66
Gas strut repositioning. This Mod moves the gas strut anchor point on the door, reducing the stress on it
#Mod 67
​Cockpit width increase - This Mod increases the effective internal width of the cockpit, at shoulder height, by 30mm (1.2”).

Also available without Ampreg
Mod 68
Electric flap drive for conventional taildragger Europas
#Mod 69
​Wing Tie down - This Mod (applicable only to XS wings which have not yet been closed) incorporates eyebolt mountings to the wings.
Mod 70
​MANDATORY - Strengthening of mass balance arm and fittings. TP18 F "butterfly" unit available if cable tensioning is retained.
Mod 71
Trigear - nose gear bungee replacement by springs
#Mod 72
MANDATORY - Undercarriage mounting strengthening. Inspection is mandatory for all Europas delviered before end 2006. Modification applicability depends on engine, engine mounting, and propeller.
Tri-Gear Conversion
A complete set of components to convert a monowheel aircraft to a tri-gear version. The empty weight of the aircraft will be increased by approx. 16Kg (35lb).
Mod 77
​This can be applied to both the Trigear and the Monowheel. This modification was developed by Graham Singleton so that the push rod drive to the rudder can be retained, reportedly helping to reduce hinge wear for the monowheel as well as to tidy up the external appearance of the tail for both the Trigear and the Monowheel
Mod 78
​Additional reinforcement to the Motor Glider wing spars. This does not affect XS or Classic standard wings.
Mod 79
XS Alternative Fuel Filler System
Mod 80
Classic Top Fuel Filler System

​Composite Materials and Ancillaries

Description
Part Number
Araldite 420 (Redux) - 1.4 kg
REDUX
​Ampreg 21 (3.75 kg) standard hardener
AMPREG
Ampreg 21 (3.75 kg) slow hardener
AMPREG S
Rapid Araldite 2012 (30ml)
5MIN
​Cloth (Please specify if you require cloth packed on a roll instead of folded - this will increase shipping costs.)
-
‘Bid’ (1 metre wide) - price in metres
92125
​‘Uni’ (1 metre wide) - price in metres
​ 92145
Peel ply (66cm - 30” wide) - price in metres
​PEEL PLY
Flox - cotton flock (min qty 1 lb)
FLOX
​Q-Cel - structural filler (min qty ¼ kg)
Q-Cel
​Expancel - surfacing filler (min qty ½ kg)
EXPANCEL
​Disposable gloves - box of 100
LATEX GLOVES
​Mixing sticks
MIX STICK
Mixing cups Pint/Half
MIX CUP
Squeegee
SQ1
Brush - 1” laminating
BRUSH-1”
Brush - 2” laminating
BRUSH-2”
Cleco - temporary skin fastener 1/8” diameter
​CLECO

​Pre Manufactured Parts

Description
Part Number
​Polished aluminium knobs for throttle lever, landing gear retraction lever, brake lever, and door latch levers including fasteners
Knob set - Monowheel
Polished aluminium knobs for throttle lever and door latch levers including fasteners
Knob set - Trigear
Knob and fasteners for airbrake lever
Knob - Airbrake lever
Pre-moulded rear bulkhead panel
F25
Pre-moulded ceiling panel
F26
Ceiling headset panel - provides for fitting microphone and headphone jacks
F27
Headset moulding kit - fittings and instructions for the above panel
​Headset moulding kit
Pre-moulded throttle box
​TH01
Pre-moulded battery tray assembly including retaining strap
​F31/2
Fuel inlet hose cover for the XS fuel inlet. This cover is made from GRP and makes fitting upholstery easy and tidy
F23
Wing root fairings for Classic wings. Save time, effort and weight with these pre-moulded fairing:
-
Port fairing
​W53P
Starboard fairing
W53S
Fin sternpost - Designed for use in the XS fuselage, but may be used in Classic fuselages
F10

​Wheels and Brakes

Description
Part Number
TYRES
  • Mono (8.00 x 6) main tyre

  • Mono (7.00 x 6) main tyreMcCreary Air-trac 

  • Mono (8.00 x 6) main tyre - McCreary Air-trac

  • Mono classic (original) tailwheel tyre - 2.50 x 3 

  • Tri-gear main tyre  5.00 x 5

  •  Tri-gear nose tyre 11 - 4.00 x 5
-
TUBES
  • ​Mono - suits 7.00 and 8.00
    tyres 

  • Mono classic (original) tailwheel tube

  • Tri-gear main wheel tube
    ​
  • Tri-gear nose wheel tube

​MAIN TUBE


​TAIL TUBE


​TIRTU500X5


​TIRTU1145L
SOLID TYRES
​
  • XS tailwheel (inc wheel, tyre & bearing) 
    ​
  • Outrigger wheel

​06-03600
 

​OWA1
Brake Components
  • ​Mono brake pad set 
    ​
  • Tri-gear brake pad set
    ​
  • Brake pad rivet punch & die set 

  • BRAKE BLEED KIT - enables topping up of monowheeel brake master cylinder and venting of air without dribbles - makes a difficult job easy. 

​

BRAKE PAD/RIVETS MONO

BRAKE PAD/RIVETS TRI

BRAKE RIVET PUNCH










​
​TYRE AND WHEEL ACCESSORIES  
  • Tube valve extension - for mono wheel   
    ​
  • Grease gun - pump type - ideal for XS tailwheels and Tri-gear nose wheels
-

​Propellers

Description
Part Number
Warp Drive 3 blade ground adjustable 62” dia. - total weight 4.7 Kg (10.4 lb). Blades have nickel leading edge protective strip. We recommend tapered blades for 912 engines, and broad blades for 912S and 914 engines.
-
Propeller hub with bolts
HPL3-914
Blades - tapered
PROP-BLADE SET
Blades - broad
PROP-NT
​Propeller complete - with XS spinner kit
-
Note - individual blades are available on special order - the original batch number required.
-
Airmaster AP332 3-blade electric fully-feathering constant speed propeller 64” dia. Total weight 12.1 Kg (26.7 lb). This propeller uses the same Warp Drive blades as above, suitably modified at the root. XS installations include an aluminium spinner, Classic installations include a modified version of the Europa spinner.
-
Complete propeller (XS - broad blades)
APCSXS
Complete propeller (Classic - tapered blades)
APCSCTP
Complete propeller (Classic - broad blades)
APCSC

​Electrics

Description
Part Number
Capacitor 22,000mF - fits between the +B terminal of the Rotax regulator and earth
381-8999
Diode - fits across the terminals of the starter solenoid
​261-306
Battery - Red Top 25
REDTOP
Comm antenna kit. This kit makes a copper tape dipole, and is fitted to the fin rear close-out. The kit also includes co-ax cable, BNC connector, and appropriate fasteners. Fitting instructions are at Annex C of the Build Manual
​AK-REV0
Microphone panel jack
JJ-033
​Headset panel jack
JJ-034
Switches
  • TCU control (Rotax 914) - SPDT Latching toggle

  • Master switch - 10A 24V DPST tan rocker

  • Alternator control - 16A 28V SPST

  • Fuel pump - 10A SPST red rocker
317-594


811-800

​
​320-225
 

320-017
​Circuit breakers
  • 1 amp square button
    ​
  • 2 amp square button

  • 5 amp square button

  • 2 amp round button
    ​
  • 25 amp round button
 CB-1A-S 

 CB-2A-S 

​CB-2A-S 

​ CB-2A-R 

​CB-25A-R 

​
Lamps 
  • Indicator - red ¼” diameter

  • Indicator - amber ¼” diameter
576-513

576-529
​

​placards

​Instrumentation

Description
Part Number
​Pitot-static plumbing kit - includes all fittings and hose necessary to connect the pitot-static lines to Altimeter, A.S.I., V.S.I., and Alt. Encoder
​P/S PLUMBING KIT
Boost gauge plumbing kit - applicable to Rotax 914 installations. Includes hose, fittings, fuel condensate trap*, bulkhead fitting
TBG PLUMBING KIT
Manifold pressure gauge plumbing kit - necessary for Rotax 912/912S engines with constant speed propellers (excluding gauge)
​MPG PLUMBING KIT
​Vacuum system plumbing kit - includes all fittings, hoses, clamps necessary for the instrument vacuum system (does not include gauge, filter, regulator, or vacuum pump)
​VAC SYS PLUMBING KIT
Manifold Pressure Gauge - essential for use with variable pitch or constant speed propellers when fitted to non-turbo charged engines (Rotax 912/912S) - 2 ¼” panel fitting
​MPG 10-35
​PFuel pressure gauge kit for Rotax engines. This kit inlcudes a 2 1/4" gauge that incorporates low and high pressure warning lights. It also includes all necessary plumbing items.
​FUEL PRESS KIT 1 (912/S)
​
FUEL PRESS KIT 2 (914)
​Fuel pressure gauge kit for Rotax engines. This kit includes a 1 1/4" gauge with colour coded markings. It also includes all necessary plumbing items.
FUEL PRESS KIT 3 (912/S)

​FUEL PRESS KIT 4 (914)
​Air Speed Indicator - made by Gebr. Winter. 20 - 200 Kts range in 1 1/3 rotation of needle. With colour coding - specify Classic (1300 lb max a.u.w.) or Classic post Mod 52/XS
6443
​Air Speed Indicator - as above but 2 1/4" panel fitting
7443
* Fuel Condensate Trap

For the early models of the Rotax engine, the pressure sensing connection was fitted into the carburetor balance tube and consequently a fuel condensate trap was required to prevent potential problems with the manifold pressure gauge.
​
For later models of the Rotax engine, the pressure sensing connection was fitted into the airbox and then a fuel condensate trap is not required.

The OWNER should check where the pressure sensing connection is to determine if it is needed. For other makes of engine the engine manufacturer should be contacted for guidance.

​Spares and Accessories

Description
Part Number
Plastic hose fittings
  •  T-piece for 3mm bore hose(was HT-4)

  • T-piece for 6mm bore hose(was 795-405)HFTP 6-6-6£1.45 

  • 1/8” N.P.T. - 3mm bore hose adapter(was 18230-1)HFSP 3-2N£2.40 
    ​
  • 12mm - 8mm bore hose reducer(was J1006)HFRP 12-8£3.22
HFTP 3-3-3
​

​HFTP 6-6-6


​HFSP 3-2N


HFRP 12-8  

​
Quick connect fittings  
  •  3mm bore hose - male connector   
  • 3mm bore hose - female connector  
  • 6mm bore hose - male connector
  • 6mm bore hose - female connector 
  • 8mm bore hose - male connector  
  • 8mm bore hose - female connector 
  Note: the 6mm and 8mm units incorporate shut off valves which are closed when the fittings are disconnected.
PMC22-02 

​PMC17-02 

​ PLCD220-04V 

​PLCD170-04V 

​PLCD220-05V 

​PLCD170-05V    
Decals - adhesive - red
​DECAL-NO STEP
-
​Decals - adhesive - red
​DECAL-NO PUSH
-
​Decal - flap angle indicator for tri-gear aircraft - black on white adhesive vinyl - see Annex A of build manual
FL29
Wing walk tape - white - 15cm (6”) wide
NSP9640501S
Registration letters We can supply registration letters in adhesive backed vinyl. Options include colour, the letters / numbers required, and whether they should be slanted, left or right (max 30°). The standard sizes are:- Fuselage height 200mm width 134mm gap 34mm Wing height 350mm width 235mm gap 58mm. The complete set includes 2 fuselage sets and 1 wing set.
REGISTRATION LETTER
Fuel funnel with mesh filter and removable concertina hose
FUNNEL
Gas strut
GS8699-1
Gas strut end sockets - plastic
​GS86991 PLASTIC ENDS
Gas strut end sockets - metal

​Note: metal sockets extend the gas strut total length by 8mm, so the lower ball fitting may need to be repositioned. These metal sockets include new ball fittings.
GS86991 METAL
​Locking fuel caps
​Fuel cap - XS
Fuel cap - Classic - metal
Locking fuel caps
​Fuel cap - Classic - metal
SPRL- LOCKING
Door Lock

Note: If locking fuel cap and door locks are ordered together they can be supplied with the same key.
DOORLOCK
​Safety hammer and strap cutter
SAFETY HAMMER
Cockpit and cowling cover Lightweight, silver finish, anti-static material, ideal for touring. Weight 900g (2.0 lb)
​XP-EUR006-03 (classic)

XP-EUR006-04 (XS)
Map pocket - elasticated net pocket for storing maps and paperwork, includes 4 mounting clips. Size 290mm x 200mm (11.5” x 8”)
TOTMP

​Tools

Description
Part Number
Smart tool - this digital level is used for measuring all angles through 360° - accurate to 0.1°
SMART-TOOL
​Perma-Grit tools   
  • Sanding tool set - 8 coarse sanding tools, supplied in a red tool set 
  • Sanding block - 280mm x 51mm (11” x 2”), coarse one side, fine opposite side.
  • Sanding block - 560mm x 51mm (22” x 2”), coarse one side, fine opposite side. 
  • Nicopress swaging tool (no.2 Swage-It). Swaging pressure is applied by using a wrench to tighten the bolts.
​SET-8CPOA 

​

SB280POA



​SB560POA



12-12000POA  ​

​Upholstery 

Part Number
Colour
Description
XP-EUR006-01 Grey
Grey
Interior kit for trigear
XP-EUR006-01 Beige
Beige
Interior kit for trigear
XP-EUR006-02
To match interior
​Seat base and back cushions -   leather to match interior
XP-EUR006-02A Red
To match interior
​Seat base and back cushions -   with red suede accent
XP-EUR006-02A Blue
To match interior
Seat base and back cushions -   with blue suede accent
XP-EUR006-02A Green
To match interior
Seat base and back cushions -   with green suede accent
XP-EUR006-03
-
Aircraft cover Europa Classic
XP-EUR006-04
-
Aircraft cover Europa XS
​XP-EUR006-05
To match seats
Leather control stick gaiters
XP-EUR006-07
To match seats
​Centre console - leather
XP-EUR006-08
To match seats
Centre console - PVC
XP-EUR006-09
-
​Triple air lumbar support
XP-EUR006-10
-
Seat bolster cushion 1" thick
XP-EUR006-11
-
Seat bolster cushion 2" thick
XP-EUR006-12
-
Propeller cover
XP-EUR006-13
-
Wing covers
XP-EUR006-14 Grey
Grey
Interior kit for monowheel Europae
XP-EUR006-14 Beige
Beige
Interior kit for monowheel Europa
​XP-EUR006-15
-
Tail section cover


**NEW:  FULL SET ALL-WEATHER COVERS**